This automated optical fiber tensile testing system is made for operator skill impartial use in production and lab settings. Two basic model configurations permit the user to pick between a set up for Optical fiber coloring machine along with extra mandrels for rotary high strength testing.
The linear version is made for creation proof screening with causes as much as 22 N. Motorized clamps with very carefully designed rubber inserts be sure that the fiber covering is not ruined inside the testing procedure whilst at the same time getting rid of the need for an external air supply. Amounts of pulling force, tugging velocity and hold time are programmable and easily available to the owner through the built-in LCD touch screen control. Information from tests can be stored and reached through the Universal serial bus port or Ethernet user interface.
Mandrels of the identical design like NYFORS? optical fiber recoaters can be easily mounted on the proof tester within the rotary high strength settings. The fiber is wrapped round the two mandrels which assistance it with a special clamping mechanism. In this way greater lots can be applied onto the fiber, allowing breaking strength tests below managed conditions.
Adjustable clamp positioning facilitates testing with the greatest force levels as well as testing of brief fiber lengths. The lightweight and light weight style makes the instrument easy to maneuver in a laboratory atmosphere and also to incorporate within a production work table where space is at a premium. The machine is a compact and lightweight tool ideal for screening the effectiveness of optical fibers as much as 30 N. The machine is developed to meet all types of applications when a power check needs to be carried out.
The machine is made with the consumer in mind. The tape former is definitely placed in the guided linear clamps, as well as the screening begins automatically using a One Contact go button. The built in microprocessor controls all of the important guidelines including pulling force, pulling speed and hold time. This allows to get a completely managed check every time.
The machine can be connected to an external Computer, which allows access to all automated guidelines and settings. The machine is tailored to stand-alone use or even to the integration into different subsystems. The machine has an substantial ability of logging and saving information such as pulling force, pulling velocity and fiber diameter as well as other parameters.
Two recoat injector designs are available. The PTR307 utilizes a computerized pump to inject the recoat materials. The quantity of material dispensed by the automated injector is managed by hand through the top-mounted “Inject” switch or programmed in to the machine making use of the tablet control. The PTR307B features a manual recoat injection system that needs an individual to personally distribute the recoat materials into the mold cavity; a replacement injector for the PTR307B recoater can be obtained below. Make sure you note that this automatic injector is just compatible with higher-directory recoat material, while the Fiber coloring machine works with both low- and high- directory bpabim materials; they are both sold separately listed below. Please get in touch with Tech Assistance to learn more.
he manual injector can be installed to suitable fiber recoaters via the 4-40 anchoring screws on the recoater real estate (see picture to the right). Utilize a 3/32″ hex key to safe the injector prior to use. To get in touch the PTRRRM for the recoater mold, tighten up the connector after the green plastic material tubing, then loosen by way of a 1/4 turn to allow for rotation.
The injector comes with a syndication valve and two-place selection lever for directing the flow of recoat materials. A knurled dispensing attach with the inner plunger works as a syringe for the recoat materials. To fill the syringe, point the lever downward (i.e., toward the recoat bottle), then spin the knurled dispensing screw counterclockwise till it spins easily to fill the syringe (shown in the photo for the right). Then, to inject the recoat material in to the mold, point the handle horizontally (i.e., facing the knurled screw) and rotate the attach clockwise till close to the end from the travel range is reached. Avoid bottoming out your dispenser as this may harm the interior plunger; also be mindful when re-engaging the threads in order to avoid cross threading the dispensing screw. Several fill up/inject steps may be needed till air is displaced inside the system. Use camera lens cells plus an acetone or alcohol cleaning solution to accumulate any extra recoat materials that flows through the mold.